Rotary Paper Trimmer – Precision Cutting Tool with Self-Sharpening Blade for Photo Paper/Cardstock/Film, Heavy-Duty Craft Cutter for Scrapbooking & Office Use, Non-Slip Base & Angle Guide (24 inches)

Description

Size:24inch

Parameter:

Model: 24 inch

Cutting: 61CM

Discretion: 2mm

Cutting table: 80*31.5cm The blade is sharp, not only can you cut ten copies of the paper at a time. PVC cards are also easily cut off.

Size: 800*80*315mm (31.5*3.1*12.4in)

Weight: 4kg

Cautions:

1. When cutting, the knife box should be evenly applied along the direction of the guide rod, and never force in other directions.

2. After the work is finished, please park the knife box at one end of the guide rod.

3, For your safety, please do not touch the blade by hand

4, The blade generally does not need to be replaced, but when the blade is notched or deformed and the knife edge becomes dull and cannot be used, the blade needs to be replaced.

Blade replacement steps:

1. When the model is 24 inches or larger, move the knife box (3) to the center of the table, and directly flip the knife box to the outside of the table to make the blade in the visible position, but not too strong, so as not to guide The rod is deformed.

2. Use a micro-slotted screwdriver to remove the top screw (1) from the knife box, and then use a wire cutter to gently pull the fixed shaft (8) down to remove the die (5).

3. Insert the special wrench into the hole of the die and the round nut, and rotate it counterclockwise to remove the blade.

4. When loading the knife box, the plane of the blade is close to the lower blade, and the chamfered surface of the blade should be outward.

The package includes:

1*24 inch rolling cutter

Good Stability: The rectangular base and thickened materials make it have good stability, allowing you to use it without worrying about it shaking and tipping.
Build to Last: High-quality metal, 65 manganese steel, aluminum alloy, and ABS and exquisite spray molding, and Integrated molding processes make it sharp, strong, corrosion-resistant and not easy to deform, so it can withstand the test of time well.
Thoughtful Design: Roller cutter head and round blade allow for bi-directional paper cutting, which is very convenient and labor-saving. The aluminum alloy guide rail ensures smooth sliding of the cutter, improving cutting efficiency.
The blade generally does not need to be replaced, but when the blade is notched or deformed and the knife edge becomes dull and cannot be used, the blade needs to be replaced.
Cutting table: 80*31.5cm The blade is sharp, not only can you cut ten copies of the paper at a time. PVC cards are also easily cut off.